|
|
| 产品展示 |
|
Shell Gadus S1 OG 1600/Shell Gadus S1 OG1600详细说明 （浏览1359次）
Shell Gadus S1 OG 1600
Open Gear and Wire Rope Fluid
Applications
Shell Gadus S1 OG 1600, is recommended for
open gears, sliding surfaces of drag lines,
construction and dredging equipment, chain and
sprocket lubrication, or other applications where
high viscosity adhesive products are required.
Performance Features
Shell Gadus S1 OG 1600 is a blend of bitumen,
highly refined mineral oils, selected EP additives
and high flash point, non-chlorinated, volatile
aliphatic diluent ensuring fluidity during
application, even at low temperatures. Its
performance benefits include: -
z Excellent extreme-pressure properties
Allows maximum load transmission whilst
protecting gear teeth and other machine
elements in particular under boundary
lubrication conditions.
z Very high adhesive characteristics
Once the diluent has evaporated, the
lubricant builds an adhesive high-strength
consistent film ensuring protection of gear
teeth even under hard operation/weather
conditions. The lubricant can easily be
cleaned up with solvents.
z Excellent anti-wear performance
Long interval between maintenance schedules.
z Good low temperature properties
Can be pumped at low temperatures without
the risk of plugging feed lines or nozzles. The
product remains flexible, retains its adhesive
properties and will not crack or flake off gear
teeth.
Operating Temperature Range
The minimum operating temperature ranges from
-10°C with a maximum range up to 95°C.
Health & Safety
Previous Name: Shell Cardium Fluid EP
• Suitable Wear Resistance
Shell Gadus S1 OG 1600 is unlikely to present
any significant health or safety hazard when
properly used in the recommended application,
and good standards of industrial and personal
hygiene are maintained.
For further guidance on Product Health & Safety
refer to the appropriate Shell Product Safety Data
Sheet.
Typical Physical Characteristics
Colour Black
Type Bitumastic
Base Oil (type) Mineral
Kinematic Viscosity @ 100°C (ISO
3104) without diluent mm2/s 1600
Kinematic Viscosity@ 100°C
(ISO 3104) with diluent mm2/s
56
Kinematic Viscosity @ 40°C (ISO
3104) without diluent mm2/s 100,000
Kinematic Viscosity @ 40°C (ISO
3104) with diluent mm2/s 1660
Flash Point
ASTM D 92 °C
110
EP Performance
Wear scar IP 239 mm
Weld load ASTM D 2596 Kg
0.25
500
Typical Physical Characteristics
These characteristics are typical of current
production. Whilst future production will conform |
|
|
