旺鸿达润滑油
深圳市旺鸿达润滑油贸易有限公司
电话:0755-29675629
传真:0755-81472607
手机:13662610386
联系人:欧阳民
网址:www.whd288.com
邮箱:shell2123@126.com
地址:深圳市宝安区龙华街道龙观东路金龙华广场二期金龙阁1307室
邮编:518000
美孚润滑油
壳牌润滑油
阿吉普润滑油
克鲁勃润滑油
埃尔夫润滑油
福斯润滑油
道达尔润滑油
嘉实多润滑油
倍可润滑油
加德士润滑
BP润滑油
太阳润滑油
Q8润滑油
长城润滑油
昆仑润滑油
好富顿润滑油
产品分类
 
产品展示
FUCHS RENISO Refrigerating Oil详细说明 (浏览1642次)
RENISO Refrigerating Oil


Print

RENISO K Series (KM 32, KS 46, KC 68, KES 100) Highly-refined, naphthenic mineral oils which contain no additives. The RENISO K Series can be used in ammonia-refrigerant plants as well as for CFC systems. The good aging stability of these products with ammonia makes them the first choice for conventional NH3 refrigeration systems .
RENISO WF Series (WF 7 - 22A) Highly-refined, selective baseoils containing a special antiwear additive system. The WF Series is used to lubricate small hermetically sealed compressors, in refrigerators, especially those operating with the refrigerant R 600a (isobutane).
RENISO TES 100 Highly-refined, paraffinic mineral oil. As a result of the good viscosity-temperature behaviour of RENISO TES 100, it is recommended for use in CFC turbo-compressors.
RENISO MS Series (MS 32, MS 46, MS 68) Mixtures of thermally stable alkylbenzenes and highlyrefined, naphthenic mineral oils. The addition of alkylbenzenes significantly improves thermal stability and solubility with HCFC (R 22, R 502). RENISO MS is recommended for CFC systems and for drop-in refrigerants (e.g. R 401, R 402 and other R 22 mixtures). RENISO MS oils are not suitable for NH3 systems.
RENISO S/SP Series (S 68, SP 32, SP 46, SP 100, SP 220) Chemically and thermally highly stable alkylbenzenes which are specially treated. As a result of favourable solubility with HCFC, RENISO SP products are recommended for R 22, R 502 and similar CFC’s as well as for R 22-based drop-in refrigerants. RENISO SP oils are not suitable for use in NH3 systems. RENISO S 68 is recommended for NH3 applications (Reniso S 68 – without AW-Additives).
RENISO SYNTH 68 Thermally-stable poly-a-olefins (PAO) with excellent cold flowing properties. Synthetic lubricating oil for conventional NH3 systems and high performance compressors. Especially for deep evaporating temperatures.
RENISO TRITON SE/SEZ Series (ISO VG 10-320) Synthetic refrigerator oils based on highly-stable polyol esters (POE). As a result of their good miscibility, these ester oils are perfect for use with chlorine-free HFC refrigerants such as R 134a, R 404A, R 407C etc. All RENISO TRITON SE/SEZ products are free of additives and are characterized by excellent stability and outstanding lubricity. As with all ester oils, these products also tend to absorb water. In extreme cases, hydrolytic decomposition reactions can occur if excessive water content in the oil and extreme loads combine. It is therefore necessary to ensure that these products do not come into contact with water or moisture during storage, handling or operation. All RENISO TRITON SE/SEZ products are ultra-dried and are filled into vapour-tight cans, pails, drums and container under nitrogen atmosphere.
RENISO PAG 46/100 Heavy-duty, polyalkylene glycols (PAG) for automotive air conditioning systems operating with refrigerant R 134a. As a result of their comparatively polar structure, PAG’s are very hygroscopic. This means that corresponding care must be taken when handling these products. The RENISO PAG Series of products are ultradried and are filled into vapour-tight cans (e.g. 250 ml), pails and drums under nitrogen atmosphere.
RENISO PG 68, RENISO GL 68 Ammonia-miscible, synthetic refrigerator oils based on special polyalkylene glycols (PAG) containing an agingstable additive system. Specially-selected synthetic components display excellent viscosity-temperature behaviour and high thermal stability. RENISO PG 68 and GL 68 were specially developed for advanced NH3systems which use the direct evaporation principle. Excess water content can cause chemical reactions between NH3 and some aluminium alloys. It is thereforevital that these PAG oils are kept absolutely dry. Any mixing with mineral oils should also be avoided. Suitable dryers to limit moisture content are available on the market.
RENISO C 55 E, 85 E, 130 E, 170 E With regard to future applications with natural CO2 refrigerant, lubricants have been developed for systems operating in both under- and trans-critical conditions. The specially-developed RENISO C Series products offer excellent thermal stability and sufficient lubricity even at high pressure levels in CO2atmospheres. Comprehensive application experience has already been gathered from test plants and prototype systems.


Advantages of using RENISO:
  • Better Service 
  • Better R&D Activities 
  • Greater Competence 
  • Greater Availability


Polyol Esters Oils (POE)
for R 134a / R 404 A / R 507 /
RENISO-TRITON SEZ 10
RENISO-TRITON SEZ 15
RENISO-TRITON SEZ 22
RENISO-TRITON SEZ 32
RENISO-TRITON SEZ 55
RENISO-TRITON SEZ 68
RENISO-TRITON SEZ 80
RENISO-TRITON SEZ 100
RENISO-TRITON SEZ 170
RENISO-TRITON SEZ 220
RENISO-TRITON SEZ 320
Polyglycols (PAG)
for R 134a in A/C systems
RENISO PAG 46
RENISO PAG 100
Mineral Oils / Alkylate (MO/AB)
For Drop-in-Refrigerants
for R 401 A,B/ R 402 A,B
RENISO MS 32
RENISO MS 46
RENISO MS 68
Mineral Oils (MO) 
For HC Refrigerants (e.g. R 600 a)
for R 22 and NH3
RENISO WF 7 A
RENISO WF 10 A
RENISO WF 22 A
RENISO KM 32
RENISO KS 46
RENISO KC 68
RENISO KES 100
RENISO TES 100
Polyalphaolefines (PAO) 
for NH3(not miscible with NH3)
RENISO SYNTH 68
Polyglycols (PAG)
for NH3 (miscible with NH3) 
for HC (Hydrocarbons)
RENISO PG 68
RENISO GL 68
Alkylbenzol Oils (AB)
for R 22 / S 68 for NH3
RENISO SP 32
RENISO SP 46
RENISO S 68
RENISO SP 100
RENISO SP 220
Special Polyolesters (POE)
for CO2 transcritical
for CO2subcritical
RENISO C 55 E
RENISO C 85 E
RENISO C 130 E
RENISO C 170 E

上一产品: CASTROL Hyspin ZH-M
下一产品: FUCHS RENOLIN MR液压油
Copyright (C) 2010 深圳市旺鸿达润滑油贸易有限公司 www.whd288.com All Right Reserved
地址:深圳市宝安区龙华街道龙观东路金龙华广场二期金龙阁1307室 电话:0755-29675629 传真:0755-81472607 联系人:欧阳民
网址:www.whd288.com E-mail:shell2123@126.com 友情链接:旺鸿达润滑油 粤ICP备16127079号