FUCHS RENOLIN HL齿轮油,CP-51414232817,开式齿轮油_深圳市旺鸿达润滑油贸易有限公司

深圳市旺鸿达润滑油贸易有限公司
电话：0755-29675629
传真：0755-81472607
手机：13662610386
联系人：欧阳民
网址：www.whd288.com
邮箱：shell2123@126.com
地址：深圳市宝安区龙华街道龙观东路金龙华广场二期金龙阁1307室
邮编：518000

产品分类

产品展示

FUCHS RENOLIN HL齿轮油详细说明　（浏览1615次）

RENOLIN HL

Ageing Resistant HL Hydraulic Oils and CKB Lubricating Oils

Diagram

Ageing Resistant HL Hydraulic Oils and CKB Lubricating Oils

Great demands are made on lubricants, particularly with regard to their ageing resistance, which are used in circulating systems such as regulators, control units, pumps and compressors which are operated for long periods with the same oil.
Such oils also need to display good corrosion protection properties and provide steel and non-ferrous machine elements with adequate protection.
RENOLIN HL oils fulfill these requirements. They are based on carefully selected, high-grade raffinates and contain additives to improve ageing resistance and corrosion protection. They can be classified as HL hydraulic oils and CKB lubricating oils according to ISO 6743-4 and ISO 6743-6.

The specific benefits of using RENOLIN HL oils are:

Good oxidation stability and ageing resistance
Rapid air release and low foaming
Excellent corrosion protection for steel and nonferrous metals
Optimum demulsification characteristics
Good compatibility with sealing materials

Application:

RENOLIN HL oils are recommended to increase the efficiency of hydraulic systems designed to use HL oils. Applications include machine tool hydraulics, agricultural machinery, earthmoving equipment and public works. They can also be used in sealed circuits to lubricate bearings, gears, regulators, vacuum pumps and high performance compressors.

Hydraulic circuits must be thoroughly cleaned before adding RENOLIN HL oils. If in doubt, the use of a special flushing oil is recommended.

RENOLIN		HL 100	HL 150	HL 225	HL 275
Hydraulic oil type
acc. to ISO 6743-4		HL 15	HL 32	HL 46	HL 68
acc. to DIN 51 502		HL 15	HL 32	HL 46	HL 68
Lubricating oil type
acc. to ISO 6743-6			CKB 32	CKB 46	CKB 68
acc. to DIN 51 502		CL 15	CL 32	CL 46	CL 68
Characteristics	Unit					Test method
Kinematic viscosity
at 40 °C	mm²/s	15	32	46	68	ASTM D 445
at 100 °C	mm²/s	3.4	5.4	6.8	9	ASTM D 445
Viscosity index		98	102	101	107	ASTM D 2270
Flash point, Cleveland open cup	°C	190	190	210	210	ASTM D 92
Pour point	°C	– 24	– 21	– 21	– 18	ASTM D 97
Neutralization number	mg KOH/g	0.15	0.15	0.15	0.15	ASTM D 974
Saponification number	mg KOH/g	0.57	0.57	0.57	0.57	ASTM D 94
Sulphate ash	% mass	< 0.05	< 0.05	< 0.05	< 0.05	ASTM D 874
Water content	mg/kg	< 200	< 200	< 200	< 200	ASTM D 1744
Demulsification	min	20	20	20	20	DIN 51 599
Air release at 50°C	min	2	2	2	2	ASTM D 3427
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention	pass A	pass A	pass A	pass A	pass A	ASTM D 665
Oxidation stability,						ASTM D 2272
RBOT method	min	> 500	> 500	> 500	> 500

Disclaimer of Liability

上一产品： CASTROL SRG Grease

下一产品： Klüberfluid C-F 7 ULTRA/Klüberfluid C-F 8 ULTRA

Copyright (C) 2010　深圳市旺鸿达润滑油贸易有限公司　www.whd288.com　All Right Reserved
地址：深圳市宝安区龙华街道龙观东路金龙华广场二期金龙阁1307室　电话：0755-29675629　传真：0755-81472607　联系人：欧阳民
网址：www.whd288.com　E-mail：shell2123@126.com　友情链接：旺鸿达润滑油　粤ICP备16127079号